Description
Makita GT201M1D1 Description
The 40V max XGT® Brushless Cordless ½” Hammer Driver-Drill (GPH01) and 4-Speed Impact Driver (GDT02) breaks new ground for the most demanding drilling and driving applications in wood, masonry and metal. The GPH01 is powered by a Makita-built brushless motor that delivers 1,250 in.lbs. of Max Torque, outpowering other driver-drills in heavy-load applications. It offers two speed settings (0-650 & 0-2,600 RPM) (0-9,750 & 0-39,000 BPM). An ultra-smooth variable speed trigger provides optimum control. The GDT02 is also powered by a Makita-built brushless motor, and that delivers 1,860 in.lbs. of Max Torque to outpower other impact drivers in heavy-load applications. An ultra-smooth variable speed trigger provides optimum control, and a one-touch 4-speed power selector button under the chuck allows users to adjust speed easily. It has 4 speed settings (0-1,100/ 0-2,100/ 0-3,200/ 0-3,700 RPM & 0-1,400/ 0-2,600/ 0-3,600/ 0-4,100 IPM). The hammer driver-drill and impact driver are engineered to outlast with Extreme Protection Technology (XPT™) to provide increased dust and water resistance in harsh jobsite conditions. Reinforced gear housing provides additional durability on the job site. XGT is a system of equipment, tools, batteries and chargers utilizing 40V max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.
Makita GT201M1D1 Includes
- (1) 40V max XGT® Brushless 1/2" Hammer Driver-Drill (GPH01Z)
- (1) 40V max XGT® Brushless 4-Speed Impact Driver (GDT02Z)
- (1) 40V max XGT® 2.5Ah Battery (BL4025)
- (1) 40V max XGT® 4.0Ah Battery (BL4040)
- (1) 40V max XGT® Rapid Optimum Charger (DC40RA)
- (1) Tool Bag
Makita GT201M1D1 Features
- Variable 2-speed Hammer Driver-Drill with Makita-built brushless motor delivers (0-650 & 0-2,600 RPM) (0-9,750 & 0-39,000 BPM) and 1,250 in.lbs. of Max Torque
- Electronic digital clutch accurately targets desired torque range (41 settings in low speed, 21 settings in high speed)
- Active Feedback-sensing Technology (AFT®) turns the motor off if rotation of the accessory is suddenly forced to stop
- Impact Driver features 4-speed power selection (0-1,100/ 0-2,100/ 0-3,200/ 0-3,700 RPM & 0-1,400/ 0-2,600/ 0-3,600/ 0-4,100 IPM) provides 1,860 in.lbs. of Max Torque
- Tightening Mode (T-mode) for faster tightening of self-drilling screws in thick or thin gauge metal
- XPT™ is engineered to provide increased dust and water resistance in harsh job site conditions
- The digital communication within XGT® optimizes performance to provide up to 2X longer sustained power under heavy-load applications
- The digital communication within XGT® actively monitors and protects against overload, over-discharge and overheating
- XGT® Tools and Batteries are designed with a multi-layer contact interface for more constant power delivery to take on high-current demands
- XGT® Batteries feature rigid rails with impact-resistant construction to secure the battery to the tool during high-demand applications
- 40V max XGT® Lithium-Ion 2.5Ah Battery reaches a full charge in 28 minutes or less
- 40V max XGT® Lithium-Ion 4.0Ah Battery reaches a full charge in 45 minutes or less
- The XGT® Rapid Charger with dual-fan design circulates air through the battery to cool the battery and circuit board quickly for faster charging
- The XGT® Rapid Charger’s digital display indicates battery charge level (-80%, +80%, 100%)
- The XGT® Rapid Charger’s built-in chip thoroughly communicates during the charging process to control current, voltage, and temperature for more efficient charging
- Compatible with Makita® 40V max XGT® Lithium-Ion Batteries
- Only use genuine Makita® Batteries and Chargers
- 3-year limited warranty on tool, battery and charger
Makita GT201M1D1 Specifications
System | 40V max XGT® |
Shipping Weight | 16.91 lbs. |
Tool Count | 2 |
Battery | 40V max XGT® Lithium-Ion |
Motor Type | Brushless |
UPC Code | 088381-783231 |